Filter
Top Products
23
If you forget your user name or password, restore the HG533 to
its default settings by pressing and holding the Reset button for
longer than 6 seconds. Then, the user name and password that
are used for logging in to the web-based configuration utility
are restored to default values.
After you restore the default settings, however, your
customized data is lost. Therefore, use this function with
caution.
5.2 Changing the Wireless Network Name
and the Access Password
In order to prevent unauthorized users from using your wireless network,
you can change them. To change the name and access password for the
wireless network, do as follows (taking the authentication type WPA-PSK as
an example):
Step 1 Log in to the web-based configuration utility.
Step 2 In the navigation tree on the left, choose Basic > WLAN.
Step 3 Choose the WLAN page.
Step 4 Enter a wireless network name in the SSID text box.
Step 5 Select WPA-PSK/WPA2-PSK from the Security drop-down
combo box.
Step 6 Enter an access password in the WPA pre-shared key text box.
Step 7 Select TKIP+AES from the WPA encryption drop-down combo
box, and keep the default settings of other parameters.
Step 8 Click Submit to save the settings.
5.3 Changing the PIN code for your SIM card
In order to prevent unauthorized users from using your SIM card, you can
change it. To change the PIN code of your SIM card, do as follows:
Step 1 Click Advanced > PIN in the navigation tree on the left.
Step 2 Choose the PIN page.
Step 3 Select Verify from the PIN operation drop-down combo box, and
Click Submit.