Filter
Top Products
33
No. Interface
or Button
Description
1 WPS
It is used to set up a wireless connection between the
HG533 and a wireless terminal easily and safely.
2 WLAN
It is used to enable or disable wireless network
function quickly.
3 On/Off
It is the power switch and is used to power on or
power off the HG533.
4 Power It is used to connect the power adapter.
5 Reset
You can press and hold the Reset button for over six
seconds to restore the default settings of the HG533.
Note
After you restore the default settings, your
customized data is lost. Therefore, use this
function with caution.
6 WAN It is used to connect to the Ethernet interface.
7~
10
LAN1 ~
LAN4
It is used to connect to the Ethernet interface on the
computer.
11 USB It is used to connect the USB device.
12 ADSL
It is used to connect to the MODEM interface on the
splitter.
7.3 Default Settings
Parameter Setting
IP address of the LAN interface 192.168.1.1
Subnet mask of the LAN interface 255.255.255.0
User name used for logging in to the
web-based configuration utility
admin
Password used for logging in to the
web-based configuration utility
admin
DHCP server function Enable