Filter
Top Products
Setting up the LitePro 580
14 LitePro 580 User’s Guide
Connecting video equipment
When connecting your VCR, camcorder, laser disc player, or other
video source, use the A/V cable included with the projector and the
LitePro 580’s ports marked “Video.”
The projector also accommodates higher quality S-Video signals. A
round, four-pin connector S-Video cable is not included with the
projector but is usually supplied with your video equipment. If both
video inputs are connected, the S-video input has priority. Use S-
Video connections when your video equipment is within a few feet of
the projector. With the S-Video connection, the greater the distance
between the video source and the projector, the more the signal will
degrade.
The projector automatically detects the broadcast signal of the video
input and accommodates the major broadcast systems: NTSC, PAL
and SECAM. The projector also allows you to lock the projector to a
specific broadcast system signal. (See “Video Mode” on page 27.)
However, if the video signal does not match the locked broadcasting
system, the projector won’t reproduce the video image properly.
Connect your video equipment’s audio output to the “Audio In”
ports of either the Video source or the Computer source. If two audio
inputs are connected at the same time, you can use the Audio menu
to lock the projector to either of the two inputs. (See “Audio Source”
on page 29.)