Filter
Top Products
Turning Tray Switching On or Off
Situation: You want to turn tray switching on or off. Tray switching specifies whether
or not to switch to another paper tray if the current one is empty. When switching is
ON (the default value) the printer automatically looks in other trays for the right size of
paper if the current tray does not contain the paper size specified by the job. OFF
specifies no switching.
Action:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Menu key until you see PAPER MENU in the display.
3. Press the Item key until you see TRAY SWITCH=
ON
* or TRAY SWITCH=
OFF
in
the display.
4. Press the Value key until you see the new value you want.
5. Press the Enter key to select the new setting. An asterisk appears next to the
value, showing that it is active.
6. To restore the printer to READY status, press the Online key.
Turning Auxiliary Tray Manual Feeding On or Off
Situation: You want to turn manual feeding for the auxiliary tray on or off. When
manual feeding is OFF (the default) paper feeding from the auxiliary tray is automatic.
When manual feeding is ON, paper feeding is manual, one sheet at a time. Messages
on the operator panel prompt you to insert each sheet.
Note: When MANUAL is set to ON, you can only print from the Auxiliary Tray. IBM
suggests you keep the default value of MANUAL=OFF and when you need to print from
the Auxiliary Tray, you select the Auxiliary Tray from your printer driver or datastream.
Action:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Menu key until you see PAPER MENU in the display.
3. Press the Item key until you see MANUAL=
ON
* or MANUAL=
OFF
in the display.
4. Press the Value key until you see the new value you want.
5. Press the Enter key to select the new setting. An asterisk appears next to the
value, showing that it is active.
6. To restore the printer to READY status, press the Online key.
Stapling Print Jobs
Situation: You want to staple your print jobs. To staple print jobs, the 2000-sheet
finisher must be installed and you must have a current printer driver installed. (The
stapling function is available only from the printer driver, you cannot select stapling from
the operator panel.)
Action:
106 User's Guide