Filter
Top Products
Action: Call for service.
56.2 ERROR FINISHER CALL FOR SERVICE
Meaning: Paper delivery swing-guide not opening or closing properly due
to either a paper delivery swing-guide detection open or close switch failure
or a paper delivery swing-guide open/close sensor failure.
Action: Call for service.
57.1 ERROR FINISHER CALL FOR SERVICE
Meaning: Paper full sensor failure.
Action: Call for service.
58.1 ERROR TRAY 3 CALL FOR SERVICE
Meaning: Tray 3 paper delivery motor failure. Paper cannot exit Tray 3
input drawer.
Action: Call for service.
58.2 ERROR TRAY 3 CALL FOR SERVICE
Meaning: Tray 3 paper lift mechanism failure. Paper cannot be fed from
Tray 3 input drawer.
Action: Call for service.
60 ERROR DUPLEXER CALL FOR SERVICE
Meaning: The printer has detected an error in the duplex unit. You can
continue to print but only simplex pages (one side). You may want to
remove the duplex unit until the problem is solved. By removing the duplex
unit, users will not be able to select duplex from the print drivers or the
operator panel.
Action: Call for service.
61 ERROR CALL FOR SERVICE
Meaning: The printer has detected an error in the ROM checksum.
Action: Call for service.
62 ERROR CALL FOR SERVICE
Meaning: The printer has detected an error in the printer controller DRAM.
(This is not SIMM DRAM but DRAM that is part of the printer controller
board.)
Action: Call for service.
63 ERROR CALL FOR SERVICE
Meaning: The printer has detected an error in the NVRAM (EEPROM).
Action: Call for service.
71 ERROR DISK CALL FOR SERVICE
Meaning: The printer has detected a hard drive failure.
Action: Call for service.
Appendix B. Understanding Printer Messages 233