Filter
Top Products
6. Unpack the options controller card.
7. Mount the options controller card on the controller card as follows:
a. Place the options controller card in position so that the connector (2) sits flush
with the opening.
b. Line up the options controller card so that the connector (2) and cable
connection (1) can be easily inserted into the controller board (2).
c. Tighten the screw (3) on the options controller board to firmly seat the options
controller card on the controller board.
1
2
3
c9pu047
8. If you have difficulty inserting the connector into controller board connector, you
may want to perform these steps:
a. Remove the options controller connector support (2).
b. Insert the connector support (2) into the controller board.
c. Line up the options controller card so that the connector (1) and cable
connection (3) can easily be inserted into the connector support (2) and the
controller board.
d. Insert the options controller card and then tighten the screw to firmly seat the
options controller card on the controller board.
Chapter 7. Installing Printer Options 163