Filter
Top Products
Appendix C. Solving Print Quality Problems
Print Is Too Light
Possible Causes Actions You Should Take Print Sample
Print quality is set to
ECONO.
Change print quality to NORMAL.
See “Configuration (Config) Menu” on
page 51.
Density is set too low Change density value to higher
setting. See “Configuration (Config)
Menu” on page 51.
There is moisture in the
paper
Load fresh, dry paper
The toner cartridge is low
on toner
Replace the toner cartridge with a
new one
The toner cartridge is
damaged
Replace the toner cartridge with a
new one
Toner Spots on the Print
Possible Causes Actions You Should Take Print Sample
Paper does not meet
specification
Use recommended paper
The toner cartridge is
damaged
Replace the toner cartridge with a
new one
Copyright IBM Corp. 1997 235