Filter
Top Products
CMUC00110E COMMAND_INFO No matching candidate connection found.
Explanation
The candidate Remote Mirror and Copy path between source and target ports
cannot be established because one or both of the physical connections cannot be
found.
Action
Specify existing source and target ports, and then resubmit the command.
Tip: Enter ″help command_name″ for more information.
CMUC00111E COMMAND_INFO One or more of the specified volumes is
not within the specified LSS.
Explanation
This command requires a logical subsystem ID and one or more volume IDs. The
volumes must be members of the specified logical subsystem. One or more of the
volumes are not members of the specified logical subsystem.
Action
Specify only volumes within the specified logical subsystem, and then resubmit the
command.
CMUC00112E COMMAND_INFO Port candidate VALUE_0 is not available
for an ESCON connection.
Explanation
You are attempting to create a path between source and target logical subsystems
on an IBM model 2105 storage unit over an ESCON connection. The specified port
is not available for an ESCON connection. This might be because the port does not
exist, because it is not identified as an ESCON port, or because it is already in use.
Action
Use the lsavailpprcport command to list available ports and their types. Specify an
available ESCON port, and then resubmit the command.
CMUC00113E COMMAND_INFO Record VALUE_1 already exists in password
file FILE_NAME.
Explanation
You are attempting to add a password record in the password file. However, the
specified user name already exists in the file.
38 IBM TotalStorage DS8000: Messages Reference