Filter
Top Products
Herita
g
e Series ADSL Brid
g
e/ Router
2-15
Installin
g
and Confi
g
urin
g
y
our xDSL Router
4. Enter the following parameters :
Bits per second 9600
Data bits 8
Parity None
Stop bits 1
Flow Control None
Then click OK
6. When the HyperTerminal window appears, you must press the
enter key several time to get the command prompt for the
Router’s command line interface.
7. Now you are ready to configure the Router by using command.
Please contact your ISP/NSP to obtain the detail command sets of
your Router. If the Router does not return any message, refer to
Appendix B for troubleshooting information.