Filter
Top Products
3-8
Basic Confi
g
urations
(use the same VPI/VCI of RFC 1577 setting)
> config save ↵
> restart
↵
Remove all existing IP module configuration device
> home ↵
> ip device flush ↵
> config save ↵
> restart ↵
We are ready for RFC1577 setup
Specify the gateway (RFC1577 on ISP/DSLAM site and Ethernet on local
PC site)
> home ↵
> ip device add ethernet ether //edd 202.1.136.254 ↵
> ip device add ipoa atm //atm 192.168.1.2 ↵
> config save ↵
> restart ↵
Enable forwarding between router interface
> home ↵
> ip relay all ↵
> ip ipatm pvc add ipoa r1483 x/y remoteip 192.168.1.1 ↵
(‘ x’ is the VPI, ‘ y’ is the VCI. Check with your service provider)
> config save ↵
> restart ↵