Filter
Top Products
5-2
Mana
g
in
g
the xDSL Router
5.2 Upgrading on-board flash memory from
Ethernet network
You can update the on-board flash memory after you booting the new
firmware from the Ethernet network by issue the following commands.
> home ↵
> flashfs rewrite boot.bin ↵
(
this command is available for update boot code only)
> flashfs update ↵
> flashfs ls
↵
You should see some messages about the file name and file sizes that
stored in the Router. If you get “
no flash content” something went
wrong.