Filter
Top Products
7-16
Command Sets for Command Line Interface
Commands for DHCP server process
1. dhcpserver config
Syntax:
dhcpserver config [add <text>|confirm|delete|flush]
Description:
This command displays or edits the current configuration of the
DHCP server. To display current configuration, provide no
arguments to the command. Use of the “add” argument adds the line
<text> to the configuration file. Use of the “confirm” argument
reparses the configuration file, confirming the changes made if the
parse is successful. Use of the “delete” argument deletes the last line
from the configuration file. Use of the “flush” argument deletes the
whole configuration. Following any change to the configuration file, it
is necessary to “confirm” the changes, issue a “flashfs update” to
commit the change to FLASH, and then restart the system before the
changes can take effect.
Example:
DSL> dhcpserver config
---
Current DHCP server configuration
---
allow unknown-clients;
allow bootp;
subnet 192.168.219.0 netmask 255.255.255.0 {
range 192.168.219.10 192.168.219.30;
max-lease-time 5000;
}
DSL> dhcpserver config flush
Configuration file flushed.
DSL> dhcpserver config
---
Current DHCP server configuration
(Issue "dhcpserver config confirm" followed by "flashfs
update" to confirm new configuration)
---
DSL>