Filter
Top Products
Presentation: Programming Guide and Line Data
Reference
for more information about the structured
field. If the structured field has no error, the error may
be an ACIF logic error. If you used a program to create
the structured fields for the page definition, contact your
system programmer.
System Programmer Response: If an IBM licensed
program was used to create the structured fields for the
page definition with the error, verify that the input to that
program was valid. If the input was valid, refer to
Advanced Function Printing: Diagnosis Guide
for
assistance in determining the source of the problem.
APK348S DATA IN A PAGEDEF RESOURCE IS
INVALID: THE NEXT LINE DESCRIPTOR
IF SPACING PARAMETER VALUE
value
IN LND STRUCTURED FIELD NUMBER
structured field
number
IS INVALID.
Explanation: The logical-record control character had
indicated that the Next Line Descriptor If Spacing
parameter should be followed. However, in the Line
Descriptor (LND) structured field identified by structured
field
number
, the Next Line Descriptor If Spacing
parameter value was either zero or greater than the
total number of Line Descriptors in the data map. The
LND structured field is contained in the page definition.
System Action: ACIF stops processing the print data
set, and issues a message identifying the position of the
structured field in the data stream or resource.
User Response: If you created the structured fields
for the page definition, correct the error and resubmit
the print request. Refer to
Advanced Function
Presentation: Programming Guide and Line Data
Reference
for more information about the structured
field. If the structured field has no error, the error may
be an ACIF logic error. If you used a program to create
the structured fields for the page definition, contact your
system programmer.
System Programmer Response: If an IBM licensed
program was used to create the structured fields for the
page definition with the error, verify that the input to that
program was valid. If the input was valid, refer to
Advanced Function Printing: Diagnosis Guide
for
assistance in determining the source of the problem.
APK353S DATA IN A PAGEDEF RESOURCE IS
INVALID: THE DATA LENGTH
PARAMETER VALUE IN LND
STRUCTURED FIELD NUMBER
structured field
number
DOES NOT
MATCH THE LENGTH OF COMPARISON
STRING PARAMETER VALUE IN CCP
STRUCTURED FIELD
CCP identifier
.
Explanation: In the Line Descriptor (LND) structured
field, the value of the Data Length parameter is used in
identifying the field of the current input record for which
conditional processing is to performed. This field is to
be compared with the Comparison String specified in
the Conditional Processing Control (CCP) structured
field. The length specified in the Data Length parameter
in the LND structured field does not match the length
specified in the Length of Comparison String parameter
of the CCP structured field. The LND and CCP
structured fields are contained in the page definition.
System Action: ACIF stops processing the print data
set, and issues a message identifying the position of the
structured field in the data stream or resource.
User Response: If you created the structured fields
for the page definition, correct the error and resubmit
the print request. Refer to
Advanced Function
Presentation: Programming Guide and Line Data
Reference
for more information about the structured
field. If the structured field has no error, the error may
be an ACIF logic error. If you used a program to create
the structured fields for the page definition, contact your
system programmer.
System Programmer Response: If an IBM licensed
program was used to create the structured fields for the
page definition with the error, verify that the input to that
program was valid. If the input was valid, refer to
Advanced Function Printing: Diagnosis Guide
for
assistance in determining the source of the problem.
APK400S THE
parameter
NUMBER VALUE IS NOT
NUMERIC.
Explanation: A numeric value must be specified after
the parameter.
System Action: ACIF terminates.
User Response: Use a numeric value after the
parameter and resubmit the job.
System Programmer Response: No response is
necessary.
APK401S THE
parameter
NAME MUST BE
DELIMITED WITH QUOTES.
Explanation: The attribute name of the parameter
must begin and end with single quotes.
System Action: ACIF terminates.
User Response: Use single quotes before and after
the attribute name in the parameter.
System Programmer Response: No response is
necessary.
164 ACIF User’s Guide