Filter
Top Products
Table 1. Client System Configuration Information (continued)
Client System
Drive 4
Shared disk
Local path name: Enter the name of the local path to the
network-mounted file system. For example, enter /shareddisk.
Table 2. Server System Configuration Information
Server System
Server properties
Enter information about the Tivoli Storage Manager server that the storage agent will need to
communicate with the server. You can verify the server information by issuing the QUERY STATUS
command from a Tivoli Storage Manager administrative command line.
Name: Enter the name of the server. For example, enter tsmsrver.
Password: Enter the password for the server. For example, enter
not4u.
TCP/IP address: Enter the TCP/IP address for the server. For example,
enter tsmsrver.tucson.ibm.com.
TCP/IP port: Enter the TCP/IP port for the server. For example, enter
1502.
Device information
External library
Executable location: Enter the fully qualified path to the external
library manager executable for each storage agent to which Tivoli
Storage Manager can send media access requests.
Library name: Enter a name of your choosing that is less than or
equal to 32 characters.
ACSLS, 3494, or SCSI library information
Library name: Enter the name of an ACSLS, 3494, or SCSI library.
Library device name: Enter the device name for an ACSLS, 3494, or
SCSI library, which you will use when you define the path.
ACSLS, 3494, or SCSI drive device names
Enter the names of the tape drives for which you will define paths. See “Obtain Device Information” on
page 15 for information on how to obtain the drive names.
Drive 1
Drive 2
Drive 3
Drive 4
Shared disk
Local path name: Enter the name of the local path to the
network-mounted file system. For example, enter /shareddisk.
Client node names
14 IBM Tivoli Storage Manager for SAN for AIX: Storage Agent User’s Guide