Filter
Top Products
- Install the Tivoli Storage Manager client or Tivoli Storage Manager data
protection application client, and the Tivoli Storage Manager API. Specify
the LAN-free option.
- Install and set up the storage agent.
–
IBM Tivoli Storage Manager Server: Defining the storage agent and
configuring devices
- If your environment is using tape devices, configure the library and drives
on the SAN.
- If your environment is using disk devices, configure Enterprise
Management and define the FILE device class. See “Step 2.2 IBM Tivoli
Storage Manager Server: Defining the Storage Agent and Configuring
Devices” on page 24 for instructions on configuring Enterprise
management.
v
Step 3: Configuring devices for the storage agent to access
– Tape devices.
– Disk devices.
v
Step 4: (z/OS only) Formatting Volumes for LAN-free data movement. Volumes
for sequential access storage pools that support LAN-free data movement using
the z/OS data manager server require formatting before they can be used.
LAN-free sessions will fail if the storage pool does not contain any formatted
volumes and does not allow automatic formatting.
v Step 5: Starting the storage agent and verifying the LAN-free configuration
– Start the storage agent.
– Verify the LAN-free configuration.
Step 1. Verifying the Network Connection
The server system and the client systems must be attached to the SAN along with
appropriate storage devices. The server system and the client systems must also be
connected by means of a LAN.
The Tivoli Storage Manager for Storage Area Networks feature requires specific
levels and models of hardware and software. Ensure that your system
configuration meets the hardware and software requirements for the SAN setup.
For details, see www.ibm.com/software/sysmgmt/products/
support/IBMTivoliStorageManager.html.
Note: If you will be using a storage agent with disk media, you must install Tivoli
SANergy or IBM TotalStorage SAN File System on the applicable machines.
Tivoli SANergy is included with the storage agent media. Note that the use
of the Tivoli SANergy components included with the IBM Tivoli Storage
Manager for Storage Area Networks product is limited to use to enable
LAN-free backup and restore to disk in conjunction with your licensed use
of the IBM Tivoli Storage Manager for Storage Area Networks product. See
Figure 5 on page 9 for possible Tivoli SANergy configurations. See the IBM
Tivoli SANergy Administrator’s Guide for details.
For information about supported file-sharing software, see
www.ibm.com/software/sysmgmt/products/
support/IBMTivoliStorageManager.html.
18 IBM Tivoli Storage Manager for SAN for AIX: Storage Agent User’s Guide
|
|
|
|
|
|
|
|
|
|
|