Filter
Top Products
Step 2.1 Client System: Installing Software
The procedures in this step describe installation and configuration of the Tivoli
Storage Manager client, API, and storage agent.
Note: Gresham EDT or any other middleware that enables an external library is
allowed. For installation information, see the Gresham or other middleware
product documentation.
Install or Upgrade the Client and API Software
1. Check that the client system meets the prerequisites for client software. See the
user’s guide for the client. Install the client software and API if it is not already
installed on the system, or upgrade the software to the latest level as necessary.
The latest levels can be downloaded from the IBM Tivoli Storage Manager Web
site at www.ibm.com/software/sysmgmt/products/
Tivoli Storage Manager Client Workstation
Client - DATAOWNER
Storage Agent - STORAGNT
Tivoli Storage Manager Server - TSMSRVER
dsm.sys file
dsmsta.opt file
define server serverpassword=fun4me
hladdress=agent.tucson.ibm.com
lladdress=1500
register node bak2work
domain=sandomain
storagnt
dataowner
devconfig.out file
set staname storagnt
set stapassword xxxxxxx
set stahladdress agent.tucson.ibm.com
define server serverpassword=xxxxxxxx
hladdress=tsmsrver.tucson.ibm.com
lladdress=1502
tsmsrver
servername
devconfig
commmethod tcpip
tcpport 1500
tsmsrver
devconfig.out
servername tsmsrver
enablelanfree yes
lanfreecommmethod tcpip
lanfreetcpserveraddress test.xyz.ibm.com
lanfreetcpport 1500
comm
tcpserveraddress .tucson.ibm.com
tcpport 1502
tsmsrver
method TCPip
Figure 9. Communications information. Results of Steps 2.1 and 2.2. The passwords are
shown as ″xxxxxxx″ because they are encrypted in the file.
Chapter 4. Installing and Configuring External Library Environments 33