IBM Partner Pavilion T400 Switch User Manual


 
errors
descriptions and corrective actions 67
Fibre Channel 79
media 82
methods of receiving 66
obtaining from AS/400 or iSeries servers 71
obtaining from RS/6000 or pSeries servers 72
reported to enclosure 66
reported to server 71, 77
reported to tape drive error log 76
SCSI bus 77
TapeAlert flags 97
troubleshooting tips 65
using sense data 71
exiting maintenance mode 45
F
fabric, switched 6
fast read/write test 43
FC-AL topology 6
FCC statement 102
feature switches
Fibre Channel 15
SCSI 14
Federal Communications Commission (FCC)
statement 102
Fibre Channel drive
assigning an address 7
cables 8
connectivity 3
FC configuration/status connector 15
Fibre Channel connector 8, 15, 29
fixing errors 79
installing 8, 13
rear view 15
removing 8, 84
resetting 8
setting an ID 19
speed 7, 24
supported topologies 6
use of SCSI protocol 1, 6
World Wide Node Name 8
World Wide Port Name 8
wrap test 40
Fibre Channel interface 1, 6
Fibre Channel-Arbitrated Loop topology 6
firmware
recovery from error 32
updating
from FMR tape 32, 37, 46
through Library Drive Interface 45
through SCSI or Fibre Channel interface 32, 45
fixing an internal jam 88
FMR tape
converting to scratch tape 41
creating 37
updating firmware from 37, 46
forcing a drive dump 38
G
getting help 104
H
hard addressing 7
head, testing 44
height of tape drive 11
help, getting 104
host sense data 71
HP
device driver support 9
supported server and operating system 9
HP-UX 9
I
ID, setting loop 19
ID, setting SCSI 17
inserting a tape cartridge 34
insertion guide, location 47, 48
installing the Ultrium 2 Tape Drive
Fibre Channel drive (Model T400F) 8, 13
SCSI drive (Model T400) 5, 13
Intel-compatible servers
device driver support 9
supported server and operating system 3
internal jam, fixing 88
iSeries server
device driver support 9
obtaining error information from 71
supported server and operating system 3
J
J33 connector 1, 4, 15
L
label area, on Ultrium Tape Cartridge 47, 48
label, for Ultrium Tape Cartridge 48
laser safety notice viii, 6
leader pin
location in tape cartridge 47, 48
reattaching to tape 57
repositioning in cartridge 55
leader pin reattachment kit 58, 95
LED 31, 32
length of tape drive 11
Library/Drive (LDI) wrap test, running 41
Library/Drive Interface (LDI or RS-422)
connecting to the tape drive 28, 29
updating firmware from 45
Library/Drive Interface (LDI or RS-422) connector
Fibre Channel drive 15
SCSI drive 14
LID
description 7, 19
setting to add LIDs 19, 22
setting to get status of loop 19, 20
118 IBM TotalStorage LTO Ultrium 2 Tape Drive