Filter
Top Products
Example 3: External-Devices Testing
Connect 7000 series modules to COM2 of the i-7540D. Set COM2 of the as
virtual COM10 of the Host PC using the VxComm Utility. Thus, we can use the
DCON Utility to search the 7000 series module through COM10.
Note: The DCON Utility has to be installed on your Host PC. The installation
software can be obtained from the following location:
z http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/dcon_utility/setup/
z CD:\Napdos\Driver\DCON_Utiltiy\Setup\
Step 1: Run the DCON Utility.
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008)
114