Filter
Top Products
4.23 99$PPIPxxx…
Description: Change the CAN bus pair connection destination IP address. After
setting successfully, all parameters will take effective after system re-start
¾ Syntax: 99$PPIPxxx…
99$PPIP Command character
xxx… IP address, iii/ppp/III/PPP: 3 digits number
Note:
This IP address is effective when enable CAN bus pair connection
and acting as TCP client or using UDP connection method.
¾ Response:
Valid Command: OK
Invalid command: ERROR
¾ Example:
Command: 99$PPIP192168255002
Response: OK
Change the CAN bus pair connection destination IP of the 7540D.
Note:
1. This command can only be accepted by 7540D’s port 10000.
2. Supported by the firmware v1.06 or later.
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008)
89