Filter
Top Products
Step 5: If you want to change the 7540D’s COM ports settings, click “Set” to
change them. The 7540D’s COM port that you want to configure is
specified by “Select Port” combo list. Port 2 means you want to
configure the 7188E’s COM2.
3
2
1
z 7188E: Command-prompt mode program, used to send data to specific
machines using TCP protocol.
Usage:
7188e [-S:IP] [-P:Port]: Connect to a device by using TCP protocol.
*Q: Quit program and disconnect.
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008)
55