![](http://pdfasset.owneriq.net/9/de/9de71720-a8f5-4371-8016-80de3ac79f80/9de71720-a8f5-4371-8016-80de3ac79f80-bg36.png)
Step 3: Send command “10” to the i-7540D. And it will response “7188E3
message.
Step 4: Select “Port 2” and “CR”. Then send “$02M” to read 7000 module’s ID
which is connected to i-7540D’s COM2. If you enable 7000 module’s
checksum function, select “CS_CR”. The “CS_CR” option will add two
checksum bytes, then adds “CR”.
1
2
2
3
i-7540D CAN-Ethernet Gateway User’s Manual (Version 1.4, April/2008)
54