Filter
Top Products
23
VLAN Mode Screen
When you enter
N
in the Transparent Mode Setup screen (page 22), the VLAN Mode
screen displays:
In this screen you can set the following parameters:
•
Default Mode
•
Port VLAN on OPTICS (or UPLINK) port
•
Port VLAN on DATA port
•
Port VLAN Filter
•
Management VLAN (available with all selections by default)
Default Mode
In the Tags column of both the Optics row and Data row, type
N
for Default mode.
Saved VLAN Values <Active after reboot>. Current VLAN Values <Active now>.
Tags VLAN IDs Priorities
Current Saved Current Saved
Ports Data VLANs are used only
Optics [0 ] [0 ] [0 ] [0 ] [ N ] if Tags are enabled on both
e Optics and Data Ports. Data [0 ] [0 ] [0 ] [0 ] [ N ] th
Management VLAN EXT Mgmt Tag
SNMP [0 ] [0 ] [0 ] [0 ] [ N ]
Saved VLAN Values <Active after reboot>. Current VLAN Values <Active now>.
Tags VLAN IDs Priorities
Current Saved Current Saved
Ports Data VLANs are used only
Optics [0 ] [0 ] [0 ] [0 ] [ N ] if Tags are enabled on both
e Optics and Data Ports. Data [0 ] [0 ] [0 ] [0 ] [ N ] th
Management VLAN EXT Mgmt Tag
NMP [0 ] [0 ] [0 ] [0 ] [ N ] S
Data Vlans <Optics <----> Data>
VLAN 1 [0 ] [0 ] VLAN 12 [0 ] [0 ] VLAN 23 [0 ] [0 ]
VLAN 2 [0 ] [0 ] VLAN 13 [0 ] [0 ] VLAN 24 [0 ] [0 ]
VLAN 3 [0 ] [0 ] VLAN 14 [0 ] [0 ] VLAN 25 [0 ] [0 ]
VLAN 4 [0 ] [0 ] VLAN 15 [0 ] [0 ] VLAN 26 [0 ] [0 ]
VLAN 5 [0 ] [0 ] VLAN 16 [0 ] [0 ] VLAN 27 [0 ] [0 ]
VLAN 6 [0 ] [0 ] VLAN 17 [0 ] [0 ] VLAN 28 [0 ] [0 ]
VLAN 7 [0 ] [0 ] VLAN 18 [0 ] [0 ] VLAN 29 [0 ] [0 ]
VLAN 8 [0 ] [0 ] VLAN 19 [0 ] [0 ] VLAN 30 [0 ] [0 ]
VLAN 9 [0 ] [0 ] VLAN 20 [0 ] [0 ] VLAN 31 [0 ] [0 ]
VLAN 32 [0 ] [0 ] VLAN 10 [0 ] [0 ] VLAN 21 [0 ] [0 ]
VLAN 11 [0 ] [0 ] VLAN 22 [0 ] [0 ]
7. Valid VLAN IDs are between 1 and 4094. Valid priorities are between 0 and
T
yp
e S or F3 to save the chan
g
es. T
yp
e Q or F4 to
q
uit and cancel chan
g
es.
TRANSPARENT MODE SETU
P
Is a VLAN tag required on Management packets? [ Y ]
The Management Tag is [7 ]
Management Priority is [0 ]
re VLAN Tags required on the EXT Port? [ N] A
er Y for Extra Tagging. Do you want to enter the Extra Tag mode? Ent
nter N if you do not want Extra Tags [ N ] E
Type S or F3 to save the new information
ype Q of F4 to quit and cancel changes T
Reboot is re
q
uired for an
y
chan
g
e to take affect.