Filter
Top Products
3
2
iView Management Software
iView² is the IMC Networks management software designed specifically for the IMC
Networks “iMcV” family of modules. It features a graphical user interface (GUI) and
gives network managers the ability to monitor and control the manageable IMC
Networks products.
iView
2
is available in several versions and can also function as a snap-in module for
HP OpenView
TM
Network Node Manager. For assistance in selecting the right version
of iView² for your operating system, please visit:
http://www.imcnetworks.com/products/iview2.cfm
iView supports the following platforms:
2
Windows™ 98 • Windows NT • Windows 2000 • Windows XP • Windows Vista
In addition, there are Java versions of iView² for other Java capable operating systems
such as Linux.
iConfig Utility
iConfig is a configuration utility in iView² that lets you quickly and easily complete the
initial SNMP configuration for IMC Networks’ SNMP-manageable devices. With
iConfig you can set the IP address, set the Subnet Mask and Default Gateway, define
the Community Strings, and define SNMP Traps. iConfig can also be used to upload
new versions of unit software.
iConfig offers an authorized IP address system and access restriction to MIB groups
supported by the IMC Networks manageable devices. These extra layers of security
are purely optional and do not effect SNMP compatibility in any way.
Default Username/Password
The default user ID and password for both iConfig and Telnet are the following:
•
User–
admin
•
Password–
admin
Refer to (P) - Password Protection/Changing Passwords on page 15 for information
about setting or changing passwords.
NOTE
It is the responsibility of the network administrator to store and maintain the
password lists.