Filter
Top Products
39
5.
Press
S
or
F3
to save the settings.
6.
Type
reboot
.
The iMcV-Giga-FiberLinX-II is now configured to pass only VLAN ID 13 from the
OPTICS (or UPLINK) port to the DATA port. Untagged packets arriving at the DATA
port (Tags = N) receive a tag (VLAN ID = 13) before being sent out of the OPTICS
(or UPLINK) port. The VLAN ID number used for a port must be different than the
number used for the Management VLAN ID.
DATA:
Untagged
Data
EXT
MGMT:
Untagged
OPTICS:
DATA VLAN ID=13
MGMT VLAN ID=20
1-EXT MGMT=ON
2-DATA=OFF
3-OPTICS=ON
Management of a host unit through the external port requires an IP address on the
host unit. A remote unit connected over the fiber link is managed through the local
unit using internal IP-less communication. If direct IP management of remote units is
required, then DIP switch #3 must be ON and the remote must have an IP address.