Filter
Top Products
11
Connecting an IBM-Compatible Laptop Computer
1 Plug the end of the CableWizard computer cable into the
video connector on your computer.
NOTE: Many laptop computers
do not automatically turn on their
external video port when a second-
ary display device such as a projec-
tor is connected. Refer to your
computer manual for the com-
mand that activates the external
video port. Activation commands
for some laptop computers are
listed in the Appendix of this
manual on page 59.
2 Plug the end of the CableWizard computer cable into the
connector on the CableWizard.
FIGURE 9
Connecting the CableWizard computer cable to an IBM-compatible laptop computer
NOTE: If you don’t want audio or
mouse control, you can use the
CableWizard Lite. CableWizard
Lite is ordered separately. See
“Accessories” on page 57.
Do you want to play your computer’s audio on the projector?
1 Plug either end of the CableWizard audio cable into the audio
connector on your computer.
2 Plug the other end of the audio cable into the connector
on the CableWizard.
computer cable