Filter
Top Products
47
7 Plug the power cord back in.
CAUTION: A surge-protected
power strip is recommended if
power surges are common in your
area.
8 Press the “|” side of the power switch to turn the projector
back on.
FIGURE 42
Replacing the fuse holder
Using the Kensington Lock
The projector has a Kensington Security Standard connector for
use with a Kensington MicroSaver Security System (Figure 43).
Refer to the information that came with the Kensington System
for instructions on how to use it to secure the projector.
FIGURE 43
Installing the Kensington lock