InFocus XS1 Projector User Manual


 
Maintenance 55
11. Restart the projector.
Resetting the lamp timer
12. After the startup logo, open the On-
Screen Display (OSD) menu. Go to the
SYSTEM SETUP: Advanced > Lamp
Settings menu. Press Mode/Enter. The
Lamp Settings page displays. Highlight
Reset Lamp Timer. A warning message
displays asking if you want to reset the
lamp timer. Highlight Reset and press
Mode/Enter. The lamp time will be reset
to '0'.
CAUTION
Do not reset if the lamp is not new or replaced as
this could cause damage.
7. Tighten the screw that secures the lamp.
CAUTION
Loose screw may cause a bad connection,
which could result in malfunction.
Do not over tighten the screw.
8. Ensure the handle is fully laid flat and
locked in place.
9. Replace the lamp cover on the projector.
10. Use a coin to turn the screw clockwise
until the lamp cover is secured.
CAUTION
Loose screw may cause a bad connection, which
could result in malfunction.
Do not over tighten the screw.
Reset Lamp Timer?
Reset
Cancel
Notice