Filter
Top Products
2-4
SCSI Devices Configuration Host Adapter Termination
Internal devices only On
External devices only On
Internal and external devices Off
table 2-1 INI-9100U possible termination settings
SCSI Devices Configuration Host Adapter Termination
Low
High
68-pin internal connector only On On
68-pin external device only On On
50-pin internal only On On
68-pin internal and 68-pin external
devices
Off Off
50-pin and 68-pin internal devices Off On
50-pin and 68-pin internal devices
and 68-pin external device
Invalid Configuration
table 2-2 INI-9100UW possible termination settings
Installation basics
The INI-9100U/9100UW PCI to SCSI Bus Master host adapter is installed into
a computer system with a PCI bus. The host adapter supports 32-bit data
transfers across the PCI bus at speeds up to 133 MBytes per second. The Initio
host adapter has no switches or jumpers to set, increasing the ease of
installation.
The SmartSCSI Setup Utility provides simple integration of the INI-
9100U/9100UW into most platforms and operating systems. The INI-
9100U/9100UW on board BIOS will allow for complete integration in those
systems that implement Plug and Play. With the SmartSCSI Setup Utility you
are able to conveniently turn on or off the SCSI auto-termination as well as
manually control the SCSI terminators without opening the system unit to