Filter
Top Products
8-8
3. Select Maintenance/Selective Install from the window by
highlighting it using the UP or DOWN ARROW keys, press
<ENTER>
• • Select Disk Driver Options (Configure/Load/Unload Disk
Drivers) from the window by highlighting it using the UP or
DOWN ARROW keys, press <ENTER>
4. Follow the directions on screen until you come to a window titled
Select A Disk Driver.
• Press the <Ins> key to insert a new driver.
• Press the <F3> key to specify a different source drive/directory.
5. In the new window that is displayed enter the Initio Driver path name:
• Insert INITIO INI-9100U/9100UW DRIVER DISK 1 into drive
A:
• Type: A:\netware\v4x Press <ENTER>
6. In the window Select A New Disk Driver To Install: a list of available
Initio drivers for NetWare and the version number will be displayed.
• Select ini910U.DSK, press <ENTER>
• Press <ENTER> to confirm, then press <ENTER> to continue
7. Once you have selected the driver, the Loaded Drivers window below
the list of Available Drivers will be updated with the driver name you
selected.
• To complete the driver loading press <ENTER>
8. This completes loading the Host Adapter Driver, follow the directions
on screen to complete the NetWare installation.
Device driver command line options
The Initio device drivers support command line switches to optimize driver
performance. Device drivers normally, once installed, require no further