Filter
Top Products
3-5
2. Use static electricity discharge precautions.
Remove possible static discharge potential from any objects that the
host adapter may come in contact with before installation. This can be
accomplished by touching a bare metal chassis rail after you have
turned off the power. This precaution will prevent possible damage to
the host adapter before removing the INI-9100U/9100UW from its
protective packaging.
3. Inserting the host adapter
Orient the host adapter for installation so that the external connector is
facing the back of the System unit and align the card with the PCI
connector on the system unit (see figure 3-3).
Holding the adapter by the mounting bracket and the card edge, match
up the card edge connector with the PCI host computer socket and
insert the card into the socket. Once the connector is in the PCI
expansion slot socket tighten the mounting bracket screw to secure the
card in place. The host adapter requires no switches or jumpers to be
set when used in PCI plug and play systems.