Filter
Top Products
10-2
SCO UNIX Driver Installation
Overview
The Initio SCO UNIX device driver will support SCO UNIX System V/386
Release 3.2v4.0 or later, SCO Open Desktop v2.0, v3.0 or later, and SCO Open
Server Release 3.0 and 5.0. The device driver is transferred from the floppy
diskette to the hard drive where it’s loaded during system initialization.
The installation of Initio device drivers to support SCO UNIX include the
following software files and may be found on the INITIO INI-9100U/9100UW
DRIVER DISK 2.
Driver.o Device driver object file
Space.c Device driver definition file
Reference Documentation:
• SCO UNIX documentation, installation and user’s guide
• The systems setup and installation guide
• The documentation for system peripherals
• Initio documentation for the SCSI host adapter
Installation
The SCO UNIX drivers developed by Initio will be installed on the disk drive
used for system initialization. It is strongly suggested that the selected
procedure be read and understood before continuing with the system
configuration or change. Please read the instructions carefully.