Filter
Top Products
Intel Desktop Board D810EMO/MO810E Technical Product Specification
10
1.1 Overview
1.1.1 Feature Summary
Table 1 summarizes the D810EMO/MO810E board’s major features.
Table 1. Feature Summary
Form Factor
FlexATX (9.0 inches by 7.5 inches)
Processor
Support for either an Intel
®
Pentium
®
III processor in a Flip Chip Pin Grid Array
(FC-PGA) package or an Intel
®
Celeron
™
processor in an FCPGA package or a PPGA
package
Memory
• One 168-pin dual inline memory module (DIMM) socket
• Supports up to 256 MB of 100 MHz non-ECC synchronous DRAM (SDRAM)
• Support for serial presence detect (SPD) and non-SPD DIMMs
Chipset
Intel
®
810E chipset, consisting of:
• Intel
®
82810E DC-133 Graphics/Memory Controller Hub (GMCH)
• Intel
®
82801AA I/O Controller Hub (ICH)
• Intel
®
82802AB 4 Mbit Firmware Hub (FWH)
Direct AGP Video
• Intel
82810E DC-133 GMCH
• 4 MB of display cache
• VGA port connector on back panel
Audio
Audio Codec ’97 (AC ’97) compatible audio subsystem, consisting of the following:
• Creative Sound Blaster
†
AudioPCI 128V digital audio controller (ES1373D)
• Crystal Semiconductor CS4297A analog codec
I/O Controller
SMSC LPC47M102 SIO low pin count (LPC) interface I/O controller
Peripheral
Interfaces
• Up to four universal serial bus (USB) ports
• Two IDE interfaces with Ultra DMA support
Serial Debug
Port
One 9-pin stake-pin serial debug port connector
Expansion
capabilities
One PCI bus connector at PCI slot 5 location
Management
Level 4 Support
• Intel
®
82559 local area network (LAN) controller
• Hardware monitor
Instantly
Available PC
• Support for
PCI Local Bus Specification
, Revision 2.2
• Suspend-to-RAM support
• Wake on USB ports
BIOS
• Intel
®
/AMI BIOS stored in an Intel
82802AB 4 Mbit firmware hub (FWH)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
✏
NOTE
The D810EMO/MO810E board is designed to support only USB-aware operating systems.