Filter
Top Products
Intel Desktop Board D810EMO/MO810E Technical Product Specification
38
2.8 Connectors
CAUTION
Only the back panel I/O connectors of the board have overcurrent protection. The internal board
connectors are not overcurrent protected, and should connect only to devices inside the computer
chassis, such as fans and internal peripherals. Do not use these connectors for powering devices
external to the computer chassis. A fault in the load presented by the external devices could cause
damage to the computer, the interconnecting cable, and the external devices themselves.
This section describes the board’s connectors. The connectors can be divided into the following
groups:
• Back panel I/O connectors (see page 39)
USB (2)
VGA
LAN
Audio line out
Mic in
• Internal I/O connectors (see page 41)
Fans (2)
IDE (2)
Serial debug port
Power
PCI
ATAPI CD-ROM
• External I/O connectors (see page 46)
USB ports
Front panel (Power/Sleep/Message waiting LED, power switch, hard drive activity LED,
reset switch, and infrared port)