Filter
Top Products
Intel Desktop Board D810EMO/MO810E Technical Product Specification
24
1.10.4 Audio Connectors
The audio connectors include the following:
• Line out (back panel)
• Mic in (back panel)
• ATAPI CD-ROM (connects an internal ATAPI CD-ROM drive to the audio mixer)
For information about Refer to
The back panel audio connectors Section 2.8.1, page 39
The location of the ATAPI CD-ROM connector Figure 5, page 41
The signal names of the ATAPI CD-ROM connector Table 29, page 45
1.11 Hardware Monitor Component
The hardware monitor component provides low-cost instrumentation capabilities. The features of
the component include:
• Internal ambient temperature sensing
• Remote thermal diode sensing for direct monitoring of processor temperature
• Power supply monitoring (+12, +5, +3.3, +2.5, V
CCP) to detect levels above or below
acceptable values
• SMBus interface
• The hardware monitor component enables the board to be compatible with the Wired for
Management (WfM) specification.
For information about Refer to
The board’s compatibility with the WfM specification Table 2, page 13