Filter
Top Products
Raptor AT – Installation Guide
26
Power Management/APM
Set this option to APM to enable the power management and
APM (Advanced Power Management) features. The settings for
this option are: APM (default) and Disabled.
Power button Function
This option specifies how the power button mounted externally
on the computer chassis is used. The settings are: On/Off and
suspend. The default setting is On/Off.
Green PC Monitor Power State
This option specifies the power state that the green PC-
compliant video monitor enters when AMIBIOS places it in a
power saving state after the specified period of display inactivity
has expired. The settings are Off, Standby and Suspend. The
default setting is Suspend.
Video Power Down Mode
This option specifies the power management state that the video
subsystem enters after the specified period of display inactivity
has expired. The settings are Disabled, Standby and Suspend.
The default setting is Suspend.
Hard Disk Power Down Mode
This option specifies the power management state that the hard
disk drive enters after the specified period of display inactivity
has expired. The settings are Disabled, Standby and Suspend.
The default setting is Suspend.
Hard Disk Timeout (Minute)
This option specifies the length of a period of hard disk
inactivity. When this period expires, the hard disk drive enters
the power-conserving mode specified in the Hard Disk Power
Down Mode option described on the previous page. The settings
are Disabled, 1 Min (minutes) and all one-minute intervals up to
and including 15 Min. The default setting is Disabled.