Filter
Top Products
Raptor AT – Installation Guide
64
Checkpoint
Code
Description
98h
The adaptor ROM had control and has now returned
control to BIOS POST. Performing any required
processing after the option ROM returned control.
99h
Any initialization required after the option ROM test has
completed. Configuring the timer data area and printer
base address next.
9Ah
Set the timer and printer base addresses. Setting the RS-
232 base address next.
9Bh
Returned after setting the RS-232 base address.
Performing any required initialization before the
Coprocessor test next.
9Ch
Required initialization before the Coprocessor test is
over. Initializing the Coprocessor next.
9Dh
Coprocessor initialized. Performing any required
initialization after the Coprocessor test next.
9Eh
Initialization after the Coprocessor test is complete.
Checking the extended keyboard, keyboard ID, and
Num Lock key next. Issuing the keyboard ID command
next.
A2h Displaying any soft errors next.
A3h
The soft error display has completed. Setting the
keyboard typematic rate next.
A4h
The keyboard typematic rate is set. Programming the
memory wait states next.
A5h
Memory wait state programming is over. Clearing the
screen and enabling parity and the NMI next.
A7h
NMI and parity enabled. Performing any initialization
required before passing control to the adaptor ROM at
E000 next.
A8h
Initialization before passing control to the adaptor ROM
at E000h completed. Passing control to the adaptor
ROM at E000h next.
A9h
Returned from adaptor ROM at E000h control.
Performing any initialization required after the E000
option ROM had control next.
AAh
Initialization after E000 option ROM control has
completed. Displaying the system configuration next.
ABh
Uncompressing the DMI data and executing DMI POST
initialization next.
B0h The system configuration is displayed.
B1h Copying any code to specific areas.