Filter
Top Products
Raptor AT – Installation Guide
30
Off-board PCI IDE Secondary IRQ
This option specifies the PCI interrupt used by the secondary
IDE channel on the off-board PCI IDE controller. The settings
are Disabled, INTA, INTB, INTC, INTD and Hardwired. The
Optimal and Fail-Safe default setting is Disabled.
PCI Slot1 IRQ Priority
PCI Slot2 IRQ Priority
PCI Slot3 IRQ Priority
PCI Slot4 IRQ Priority
These options specify the IRQ priority for PCI devices installed
in the PCI expansion slots. The settings are Auto, (IRQ) 3, 4, 5,
7, 9, 10, 11, 12 and 14. The Optimal and Fail-Safe default
setting is Auto.
DMA Channel 0
DMA Channel 1
DMA Channel 3
DMA Channel 5
DMA Channel 6
DMA Channel 7
These options allow you to specify the bus type used by each
DMA channel. The setting is either PNP or ISA/EISA. The
optimal and fail-safe default setting is PNP.
IRQ3
IRQ4
IRQ5
IRQ7
IRQ9
IRQ10
IRQ11
IRQ12
IRQ14
IRQ15
These options specify the bus that the specified IRQ line is used
on. These options allow you to reserve IRQs for legacy ISA
adapter cards. These options determine if AMIBIOS should
remove an IRQ from the pool of available IRQs passed to