Filter
Top Products
Intermec EasyCoder F4 – Installation & Operation IPL Version, Ed. 342
Chapter 7
To enter the Setup Mode, press the <Setup> key on the printer’s
built-in keyboard. The following message in the display window
indicates that you have entered the Setup Mode:
SETUP:
COMMUNICATION
While going through the setup procedure, you are guided by texts
in the printer’s display. You can step between setup parameters,
acknowledge displayed values, select or type new values etc. using
some of the keys on the printer’s keyboard.
Entering
Setup Mode
at Installation
Setup Mode
1
/. Left, right, up, and down refer to the overviews later in this
chapter.
Move up one level or scroll back in a stack
of options
1
.
Move one menu to the right on the same
level
1
.
Move one menu to the left on the same
level
1
.
Specify negative values (leading position).
Enter numeric values.
Exit the Setup Mode.
(Can be used anywhere in the Setup Mode.)
Clear erroneously entered values.
Acknowledge and move to next menu.
Print test labels in the Testprint menus.
Move down one level or scroll forward in a
stack of options
1
.
-
Navigating in
Setup Mode