Filter
Top Products
Intermec EasyCoder F4 – Installation & Operation IPL Version, Ed. 36
Chapter 1
Introduction
The EasyCoder F4 is a sturdy medium-duty direct thermal/thermal
transfer printer with a printhead resolution of 8 dots per mm
(203.2 dots per inch) and a maximum print width of 104 mm
(4.095 inches).
The EasyCoder F4 is delivered with the Intermec Programming
Language (IPL-3) installed. There is also a version of the EasyCoder
F4 that uses the Intermec Fingerprint Programming Language.
Mechanically, the IPL version is identical to the Intermec Fingerprint
version, but a few options are not supported by IPL-3, for example:
• Optional double serial and industrial interface boards
• Electronic keys
• Memory cards (except for fi rmware upgrading)
• EasySet Bar Code Wand
• Real Time Clock Circuit
In most respects, the EasyCoder F4 IPL version is compatible with
other IPL printers from Intermec. Please refer to Appendix 4 for a
list of supported IPL-3 commands.
Description