Filter
Top Products
108 SBG1000 Wireless Cable Modem Gateway User Guide
Home
X
ExitPrint
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
Setting Up a USB Driver in Windows XP
Be sure the Motorola SBG1000 Wireless Cable Modem Gateway CD-ROM is inserted into the CD-ROM drive
before you plug in the USB cable. A few seconds after you complete the USB connection, the Found New
Hardware Wizard window is displayed:
1 Be sure “Install the software automatically” is selected.
2 Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is
successful, the following window is displayed:
3 Click Finish to complete the installation. Otherwise, be sure the Motorola SBG1000 Wireless Cable Modem
Gateway CD-ROM is correctly inserted in the CD-ROM drive.
When you finish setting up the USB driver, you can continue with “Configuring TCP/IP” on page 57.
Although your SBG model number may be different than in the images in this guide,
the procedure is the same.