Filter
Top Products
33 SBG1000 Wireless Cable Modem Gateway User Guide
Home
X
ExitPrint
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
5 Click OK to display the SBG1000 user configuration and status windows:
Router is a configuration option that may appear on your window but may not be supported.
Click To Perform
Cable Configure and monitor the cable system connection.
Gateway Configure and monitor the gateway preferences (see “Configuring the Gateway” on page 45).
Wireless Configure and monitor the wireless interface (see “Setting Up the Wireless LAN” on page 71).
Firewall Configure and monitor the firewall (see “Setting the Firewall Policy” on page 36).
Printer Configure the SBG1000 print server (see “Configuring the Print Server” on page 81).
Admin Changing the Default Password (see page 34).
Help Display information about the SBG1000 (see “Getting Help” on page 35).
Info Display information about the
SBG1000 Setup Program.
Reboot Restart the SBG1000. It is the same as pressing the reset button on the Rear Panel for less than five
seconds.
For some settings, after you edit the field and click Apply, you are warned that you must Reboot for your
change to take effect. Rebooting takes 10 to 15 seconds. After rebooting, you must log-in again.