Filter
Top Products
26 SBG1000 Wireless Cable Modem Gateway User Guide
Home
X
ExitPrint
Overview Installation Troubleshooting Contact FAQ Specifications Glossary License
Configuration: Basic Gateway TCP/IP Wireless Print Server USB
6 If necessary, seat an anchor in each hole.
Use M5 x 38 mm (#10-16 x 1
1
/
2
inch) screws with a flat underside and maximum screw head diameter of
10.5 mm to mount the SBG1000.
7 Using a screwdriver, turn each screw until part of it protrudes from the wall, as shown:
• There must be 4.0 mm (.16 inches) between the wall and the underside of the screw head.
• The maximum distance from the wall to the top of the screw head is 7.6 mm (.3 in).
8 Place the SBG1000 so the keyholes are above the mounting screws.
9 Slide the SBG1000 down so it stops against the top of the keyhole opening.
7.6 mm (.3 inches) maximum
10.5 mm (.4 inches) maximum
4.0 mm (.16 inches)