Filter
Top Products
52
REQUIRED HARDWARE
qBi-Directional 25-pin printer interface
q486DX2 or higher CPU
OPERATING ENVIRONMENT
qPersonal computer with Microsoftா* Windowsா* Operating System Version 3.1
(also verified to run with Microsoftா Windowsா 95)
* Microsoftா and Windowsா are trademarks of the Microsoft Corporation registered in the
United States and other countries.
q16 MB RAM or more
qAt least 8 MB available hard disk space
qColor display capable of handling at least 640 x 480 dots and 256 colors
(Recommended: true color 24-bit)
qWindowsா-compatible mouse connected to PC
q3.5” 1.44MB floppy disk drive
qPC which allows setting of Parallel Port to “Bi-Directional” or “Enhanced Parallel Port” mode.
qBIOS setting (with EPP or Bi-Directional setting) (see below)
BIOS SETTING
The GV-PT2 Driver & Capture Utility Software is designed to use a two-way communications
interface as a prerequisite in the environment of Windowsா. It runs when the parallel-port mode
is set to EPP or Bi-Directional (represented as PS/2 Exchange mode or Extension mode in some
PCs).
The initial setting of some PCs may not be EPP or Bi-Directional. In this case, set the mode to
EPP or Bi-Directional using the PC’s set-up utility. Refer to your computer’s user manual for
details.
Some PCs capable of two-way communications may not provide any setup indication for EPP or
Bi-Directional. In this case, consult the manufacturer of your computer.
INTRODUCTION