Filter
Top Products
12
Network settings
USER PAGE can be customized
USER PAGE can be customized as desired.
USER PAGE created on a PC is uploaded by FTP.
1.
Set the unit so that NETWORK SETUP can be displayed. (☞ page 30)
2.
Create HTML on the PC using a commercially available HTML editor, etc.
Save the created HTML file under the name of “index.html”.
3.
Use a commercially available FTP program on the PC to upload index.html created in step 2 above to KA-DV5000.
FTP program settings
IP Adress : 192.168.100.101 (Input the actual IP address used.)
Remort Port : 21
USER ID : html
PASSWORD : None
\It is also possible to upload link pages from index.html, images, etc.
Caution
●
Make sure the uploaded files do not exceed 100KB in total.
●
The HTML display will fit properly on the screen when creating at a size of about 500 X 360 pixels.
13
Network settings
Making network related settings
Network related settings are made in the individual input setting screens.
Here, USER NAME is set as an example. Other settings are also made in the same manner.
Example: Changing USER NAME from jvc to jvc-1234
\Select USER NAME in the NETWORK SET [2/2] menu screen and press the
SHUTTER dial.
● The USER NAME input setting screen appears.
1.
Characters are selected from the character selection area on the bottom of the
screen.
Turn the SHUTTER dial to flash “_” in the character selection area and press the
SHUTTER dial.
● The setting changes to “jvc_” and the following digit of the setting area flashes.
2.
Turn the SHUTTER dial to select “1” in the character selection area and press the
SHUTTER. dial.
● The setting changes to “jvc_1” and the following digit of the setting area flashes.
3.
Repeat the above step to set “jvc_1234” in the setting area.
\To delete or edit set characters, select “BS” within the character selection area and
press the SHUTTER dial.
The previous character will be deleted. The character on the left will be deleted each
time this operation is repeated.
\The currently inputted number of characters and the maximum number of characters
are displayed on the upper right of the screen.
4.
When completed, select “ ” within the character selection area and press the
SHUTTER dial.
● NETWORK SET [2/2] menu screen returns in the LCD or viewfinder.
4
/
8
RSEUNA
EM
jvc
abcdef
g
hijklmnopqrstuv
wxyz01
2
3456789
_
_
.
BS
¯
5
/
RSEUNA
EM
jvc 1
abcdef
g
hijklmnopqrstuv
wxyz01
2
3456789
_
8
_
.
BS
¯
3
/
8
RSEUNA
EM
jvc
abcdef
g
hijklmnopqrstuv
wxyz01
2
3456789
_
.
BS
¯
8
/
RSEUNA
EM
jvc 1234
abcdef
g
hijklmnopqrstuv
wxyz01
2
3456789
_
8
_
.
BS
¯
USER NAME input setting screen
: Return to menu screen
Currently inputted number of characters/
max.number of characters
Setting area
Character
selection area
BS:
Backspace (
delete previous character
)
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
1
3200K
5600K
5600K
5600K
ND
/
/
ND
2
.3
.4
1
8
1
64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCDBRIGHT DISPLAY
STATUS
SHUTTER
MENU
NETWORK
PACK
KA-DV5000
POWER
SUPPLY
ONOFF
SHUTTER
dial
STATUS
button