Filter
Top Products
E-10
: Card not inserted
e
: LAN card
C
F
: Compact Flash card
Check to see whether the main unit has been
mounted correctly using the procedure shown
below.
1 Tu rn off the power of GY-DV5000 and KA-
DV5000.
2 Press the button on the side of the main
unit, open the cover and insert a card in
the card slot.
3 Close the cover and turn on the KA-
DV5000 power.
4 Tu rn on the GY-DV5000 power.
5 Check the card status. Check to see that
the card status according to the card type
is displayed on the LCD monitor and
viewfinder screen of GY-DV5000.
Depending on the card shape, the cover
may get in the way or may not close
correctly. In this case, the cover can be
removed by twisting the cover backward
while it is open.
Confirming correct attachment
Memo
Removing the cover
1 Open the cover.
2 Remove by pressing in
as shown on the right
so that the cover
widens on sides.
Attaching the cover
Perform the steps
above in reverse.
Be sure to turn off the GY-DV5000 power
before removing card.
Caution
Removing/attaching the cover
During initialization
after the power is
turned on, the card
status display shown
on the left is dis-
played.
Memo
E-11
English
Installing Streamproducer
1.
Insert the CD-ROM with Streamproducer into the CD-ROM drive.
Wait until the access lamp of the CD-ROM
drive goes out.
The screen shown on the left appears.
2.
Click on “English”.
The screen shown on the left appears.
3.
Click on “Install Streamproducer”.
The Installer starts up.
Detailed information on how to operate the Streamproducer is described in the “Read
User’s Guide”, so please refer to this.
The “Read User’s Guide” can be invoked by selecting:
Start menu/Programs/Streamproducer/User’s Guide.