Filter
Top Products
32
Network pack setup
CAM & VTR CONTROL screen
\VTR Control
VTR control icons
Click each button to perform
operation.
\To control the VTR in the Streamcorder screen, the following menu items of GY-DV5000 must be set in advance.
\VTR control icon operations by MODE switch settings of GY-DV5000 are as follows:
● Set NET REMOTE in the OTHERS [1/2] menu screen to ON.
When set to OFF, the VTR cannot be controlled from the
Streamcorder screen.
OTHERS [1/2] menu screen
—: Mode will not change
GY-DV5000 state Clicking VTR control icon
MODE switch Previous mode REC REW STOP FF PLAY PAUSE/STILL
VTR STOP REC REW — FF PLAY —
FF — REW STOP — PLAY —
REW ——STOP FF PLAY —
PLAY —
REV SEARCH
STOP
FWD SEARCH
— STILL
STILL ——STOP — PLAY —
CAM STOP REC REW — FF ——
REC ——STOP ——STBY
STBY REC — STOP ———
LONG PAUSE T IME
OTHERS[1/2]
30MIN
REMOTE FF/RW MODE SEARCH
STEP SLOW MODE FIELD
DV REC TRIGGER ON
NET REMOTE ON
NEXT PAGE
PAGE BACK
33
Network pack setup
NETWORK SETUP screen
Clicking NETWORK SETUP on the left of the Streamcorder screen displays the NETWORK SETUP screen for performing network
related settings.
Contact your network administrator for any unclear points concerning network settings.
Item
Host Name
Domain Name
IP Address
Subnet Mask
Default Gateway
DNS server
Wireless LAN
Description Factory setting
The host name can be set. (Max: 63 alphanumerical characters) none
The domain name can be entered. (Max: 63 alphanumerical characters) none
The IP address can be set. 192.168.100.101
(
☞
page 11)
The subnet mask can be set. (
☞
page 11) 255.255.255.000
The gateway address can be set. (
☞
page 11) 192.168.100.254
The address of the domain name system server can be set. 0.0.0.0
Settings concerning wireless LAN can be made (
☞
page 11)
●AD-HOC MODE: Ad-hoc mode IBSS/AHDM/OFF OFF
●WLAN CH: Wireless LAN channel 2 ch
●ESS-ID: Network identification name (Max: 32 alpha numerical characters)
●WEP: 64bit, 128bit, OFF
●WEP Key: Allowed characters: 10 characters consisting of 0 ~ 9, a ~ f, A ~ F
Caution
If the IP address is changed in the Streamcorder screen, the unit will automatically jump to
the new IP address. However, the screen may not be displayed correctly depending on the
environment. In this case, access by specifying the new IP address using a browser.
(
☞
operation
7.
on pages 30)