Filter
Top Products
32 EN
TROUBLESHOOTNG (cont.)
• This function may not operate correctly
sometimes depending on your PC’s
specifications and operating environment.
• This may occur␣ if you move the DV
Controller window, operate its scroll bars or
perform a file operation while capturing
images.
•␣ This may occur if correct data is not being
transmitted due to damage on the videotape.
•␣ This may occur if a tape recorded in the LP
mode is played back on a different video
source unit. Play videotapes using the video
source unit they were recorded on.
•␣ There may be software running in the
background. Confirm that there are no
programs running in the background that
may be using the processor at the same time
as JLIP Video Capture.
Problem Cause Page
6, 9, 11,14Automatic capture does not
function correctly.
NOTE
When using a laptop PC, operation may be interrupted by a warning when the battery is
nearly exhausted.
• If there is software which monitors the status of the battery running in the StartUp folder...
Close the application, or delete/move its icon from the StartUp folder and reboot your PC.
• If you are using your PC’s power management function...
Click the right button to select My Computer, then select Properties —
System Properties — Device Manager — System Devices — Advanced Power Manage-
ment Support. Follow the appropriate procedure below.
For Windows
®
95, click Settings and deselect Enable power management support (the check
mark (ߛ) next to it disappears).
For Windows
®
98, select Disable in this hardware profile (a check mark (ߛ) appears next to it).