Filter
Top Products
4
Caution
● Make sure the power of BR-DV6000 is off when inserting/
removing a CF memory card/LAN card. Inserting/removing
a card with the unit power on may damage the data storage
section of the CF memory card or the card itself.
● Do not remove the power cable with the power of the BR-
DV6000 on. Recorded section on the CF Memory Card or
the CF Memory Card itself may be damaged as a result.
● Do not use the wireless LAN card continuously for more
than 48 hours.
LCD screen
Card status display
: Flashes during
initialization
: LAN card or built-
in LAN enabled
: CF memory card
Inserting card
1.
Turn off the BR-DV6000 power.
2.
Insert a card into the SA-DV6000 card slot.
3.
Turn on the BR-DV6000 power.
● Card status according to the inserted card type is displayed on
the LCD screen. (☞ page 6)
● The card status is displayed when setting the LCD screen to the
Enlarged display mode.
Memo
When turning the power on, the card status
display shown on left will flash during initial-
ization.
Basic Inserting/removing CF memory card/LAN card
● TheSA-DV6000 accepts the following cards for which operation has
been confirmed: (As of June 2003)
Operating voltage 3.3 V / 5 V
Current consumption Max. 250 mA
●Wired LAN-card
US: EA2900-117 (Revision C) (Name of manufacturer: Socket
Communications, Inc)
*1
Europe: EA2903-162 (Revision C) (Name of manufacturer: Socket
Communications, Inc)
*1
Asia: EA2906-194 (Revision C) (Name of manufacturer: Socket
Communications, Inc)
*1
* Revision indicated on the upper right of package production label.
●Wireless LAN-card
TEW-201PC
TEW-202CF
TEW-PC16 (firmware version 0.8.3 or later) (Name of manufacturer:
TRENDware)
WCF11 (Name of manufacturer: LINKSYS)
*2
AIR-PCM350
(Name of manufacture: Cisco Systems)
FCCID: LDK102040
●CF (Compact Flash) card
SDCFB-16 ~ SDCFB-256 (Name of manufacturer: SanDisk)
*1
*1: Use PCMCIA card TYPE 1 or TYPE 2 adapter
*2: Use PCMCIA card TYPE 2 adapter
For the latest operational check card, visit the website
below or contact your JVC dealer.
http://www.jvc-victor.co.jp/english/pro/prodv/
Removing card
1.
Turn off the BR-DV6000 power.
2.
Press the EJECT button of SA-DV6000 and remove the card.
EJECT button
SA-DV6000
Card slot
CF memory card or
LAN card
CH1
NDF
12
H
34
M
34
S
10
F
FREE
CH2
PLAY
SP222
min
01/02/03
01:23:45 INS
AM
OVER
48k
T
C
L
dB010203040
OVER
W
Y/C
VA
SYNC
‰
e
CF
e
C
F
Surface