JVC VN-E4 Network Card User Manual


 
29
Settings (continued)
5-6 Serial Page
This page is for setting the 2 serial ports.
This page can be used upon access via AadminB or AoperatorB.
Press the AOKB button to enable the new settings upon changing. If the AOKB button is pressed upon entering an invalid value, a
warning message will appear and entry will be denied. Press the ACancelB button to restore the invalid entry to the current value.
A Controlled Device Select a device accordingly when an external device is to be controlled using the built-in viewer.
The ABaud RateB, AData LengthB, AParityB and AStop BitB settings will be automatically adjusted
according to the default values of the selected device.
When APelco-DB is selected for AControlled DeviceB, ACamera AddressB may be specified
individually for the 4 input channels.
B Baud Rate For setting the baud rate of the serial port.
C Data Length For setting the data length of the serial port.
D Parity For setting the parity bit of the serial port.
E Stop Bit For setting the stop bit of the serial port.
F Comment For writing memo. Comments will only appear when this page is displayed, and functions of the
serial port will not be affected.
A
B
C
D
E
F