Filter
Top Products
36
Settings (continued)
Ⅵ5-13 Maintenance Page
This page is for maintenance purposes.
This page can be used upon access via AadminB.
A message will be displayed on the Internet Explorer when update is successfully completed. Network settings will be saved upon
updating the firmware, but all other settings will be initialized.
A A/V Settings Restores setting items in the AInputB page, AEncodingB page and AMotion DetectionB to their
default values.
JPEG or audio transmissions that are in progress will continue if these are possible with the
factory settings.
B All Settings Restores all setting items to their default values and reboots the unit. Passwords will also be
initialized. However, the built-in clock of VN-E4 will not be affected. JPEG transmission and all
other services that are running is terminated.
(A pg. 37, AInitial Values of Each PageB)
C Update For updating the firmware of VN-E4. Copy the new firmware file to the PC on which Internet
Explorer is used, and specify this file using the ARef...B button.
Press the AUpdateB button to start updating. Update may take several minutes. Update progress
status is indicated on the lamp at the front panel of VN-E4.
Progress Status STS CH1 CH2 CH3 CH4
Uploading file Light ON Blinking Light OFF Light OFF Light OFF
Start FLASH writing Light ON Light ON Blinking Light OFF Light OFF
FLASH writing 1/3 completed Light ON Light ON Light ON Blinking Light OFF
FLASH writing 2/3 completed Light ON Light ON Light ON Light ON Blinking
Rebooting Light OFF Light OFF Light OFF Light OFF Light OFF
Startup completed Light ON Light OFF Light OFF Light OFF Light OFF
A
B
C
Ref...